infiray A8 thermal camera
A8 Series Online Temperature Measurement IR Camera
Provide advanced thermal imaging solutions and temperature measuring for field condition monitoring.A8 Series Online Temperature Measurement IR Camera has a built-in InfiRay new VOx detector. With two infared resolutionns available 384×288/256×192, and was integrated with a 1920×1080 visible-light camera, and a LED light, it has higher environmental adaptability. With more advanced Matrix Ⅲ image algorithm, optimized processing circuit, reduced SWaP, it is easier to use with richer functions.

Extraordinary On-site Monitoring Performance, Specialized For Small Space Monitoring

384×288/256×192 high resolution, thermal sensitivity <0.06℃, providing high-defifinition images while distinguishing more details or monitoring farther targets.
25Hz frame rate, network interfaces, supporting on-site real-time temperature data transmission.
Measuring range -20℃~+600℃(up to +600℃ optional), making it more possible to monitor more industrial targets with high-temperature requirements.
nfrared + visible light dual-vision imaging, supporting single infrared or visible light and dual-light fusion monitoring, all in one.

Smaller Than Playing Cards, Easier To Integrate And Control

Small size, vertical wiring can be installed against the wall, fully optimized for applications in small spaces such as electrical cabinets.
6 color palettes, 2 million visible light resolution, built-in LED light, adapting to complex environments and providing more modes, to improve effiffifficiency and ensure safety.

Powerful Networking Software Support

Fully built-in support for IRay network monitoring and temperature measurement software, capable of both single camera analysis, and multi-camera network monitoring.

Support various communication, network, and monitoring protocols, such as ONVIF.
Support 6 movable points, 1 line, and 6 movable areas for temperature measurement, multiple color palette control, etc. Multiple over-temperature alarm modes with IO port can realize on-site over-temperature alarm Support built-in memory, optional built-in TF card, maximum support 64GB, without worry about offlfflffline information recording.
With IP67 water and dust proof, it can adapt to the industrial site with worse environment and temperature. It can work directly in the place with higher humidi ty or more dust, with less protection to reduce the cost.
Provide Windows/Linux SDK, powerful secondary development support.
Compatible with mainstream monitoring protocols such as ONVIF to achieve better network compatibility.
Ethernet network interface and I/O signal output ensure real-time temperature monitoring and abnormal warning.

Main Specifications

Model

A8

A8L

A8Z3

Infrared Specfications

Detector Type

Uncooled VOx IRFPA detector

Resolution

240×180

256×192

384×288

Pixel spacing

17μm

12μm

17μm

Thermal Sensitivity

<60mK

Frame Rate

25Hz

Focusing

Fixed

Lens

6.8mm

2.3mm

4mm

9mm

6.8mm

FOV(H×V)

33.4°×25.4°

90°×62.5°

42.0°×32.1°

19.6°×14.7°

51.3°×39.6°

Palette

At least 6 Palette(Black hot/ white hot ...)

Visible Light Specifications

Resolution

1920×1080

Fill Light

Built-in LED

Alarm

Alarm Function

All spots, maximum, minimum and average temp in all areas can be configured with separate alarm output

Alarm Output

I/ O output, log, save image, file send (FTP), email (SMTP), notification

Protocol/ Standard

Protocol/ Standard

TCP/IP、ONVIF、GB/28181

Video Stream

Format

H.264

Video Settings

Manual/Auto

Image Storage

Storage

Built-in memory, optional TF card, max 64GB

Storage Mode

Infrared/ visible images separately/ simultaneously/ Fusion

Storage Format

JPEG、MP4

Software Support

B/S Setting

Support

C/S Setting

Support

SDK

Out put the original temperature data and provide SDK for secondary development

Power Supply And Interface

Voltage and Power Consumption

DC12V, rated power: 1.5W, peak value: 2.5W

Video Interface

Analog Video

Network Interface

Includes 10M/ 100M adaptive Ethernet port and Poe power supply

Alarm Interface

Alarm I/ O interface

Network

Transmission

Ethernet

Temperature Measurement

Measuring Range

-20 ℃~ +600℃

-20 ℃~ +400℃

-20 ℃~ +600℃

Accuracy

±2℃ or ±2% of reading

Point/Line/Area Temp

6 spots, 1 line, 6 areas

Preset Value

Support

Emisivity

0.01 ~ 1.0

Temp Correction

Auto, input value based on reflection

Environmental Specifications

IP Encapsulation

IP67

Operating Temp

-10℃ ~ +50℃

Storage Temp

-30℃ ~ +70℃

Humidity

≤95% non-condensing

Physical Specifications

Dimension

54× 25 × 79(mm)(Without connector)

54× 25 × 95(mm)(Withconnector)

Optional Accessories

Optional Accessories

M12X Cable / M12A Cable

Bracket / Heat Sink

Product consulting

Username used for comment:
Customer message
Description: